Fritz! Box 6490 cable - Page 134

FRITZ!Box 6490 Cable 134
Sharing a USB Printer
Setting Up a USB Printer in Other Operating Systems
• As the port type, select “Raw TCP”.
• Enter “9100” as the port.
• Enter “fritz.box” as the printer name.
Configuring a USB Printer with FRITZ!Box USB Remote
Connection
If you are using an all-in-one device or would like to use the
convenience features of a USB printer connected to the
FRITZ!Box, we recommend installing the FRITZ!Box USB re-
mote connection software. The FRITZ!Box USB remote con-
nection program can be installed on computers with
Windows 8, Windows 7 or Vista (32- and 64-bit).
Installing FRITZ!Box USB Remote Connection
Install the program for FRITZ!Box USB remote connection on
all of the computers with which you want to use the connect-
ed USB device.
1. Connect the USB printer to the USB port of the
FRITZ!Box.
2. Open the FRITZ!Box user interface; see page 25.
3. Enable the advanced view.
4. Select the “Home Network / USB Devices / USB Remote
Connection”.
5. Click the “USB remote connection software” link.
6. In the “USB Remote Connection” window, click “Down-
load”.
7. Download the file “fritzbox-usb-fernanschluss.exe”.
The names of entries or menus in operating systems not de-
scribed above may be slightly different than the terms we
use here.
If the FRITZ!Box is configured as a wireless repeater or an IP
client, enter here the IP address at which the FRITZ!Box can
be reached within the network.