95
The third character will now
flash
7. Use the ‘Up’ and ‘Down’ keys to
select a letter for the third cha-
racter
8. Press the ‘Enter’ key
The set currency will now flash
9. Press the ‘Enter’ key
The charge rate is now display-
ed in kWh/currency,
factory setting = 0.48 EUR /
kWh
The first digit will now flash
10. Use the ‘Up’ and ‘Down’ keys to
select a value for the first digit
(e.g. 0)
11. Press the ‘Enter’ key
The second digit will now flash
12. Use the ‘Up’ and ‘Down’ keys to
select a value for the second
digit (e.g. 0)
13. Press the ‘Enter’ key
Setting the
‘CASH’ Menu
Option
(continued)
The first digit after the decimal
point flashes
14. Use the ‘Up’ and ‘Down’ keys to
select a value for the first digit
after the decimal point (e.g. 4)