Fronius IG Plus 35 - Status Messages - Class 4

119
Status Some class 4 status messages
require intervention by a trained
Fronius service technician.
401
Communication with power module not possible
Behavior The Fronius IG Plus will automatically attempt to
connect again and, if possible, resume feeding power
into the grid
Remedy If the status message remains on the display: notify a
Fronius-trained service technician
402
Communication with EEPROM not possible
Behavior The Fronius IG Plus will automatically attempt to
connect again and, if possible, resume feeding power
into the grid
Remedy If the status message remains on the display: notify a
Fronius-trained service technician
403
EEPROM defective
Behavior The Fronius IG Plus will automatically attempt to
connect again and, if possible, resume feeding power
into the grid
Remedy If the status message remains on the display: notify a
Fronius-trained service technician
406
One or both temperature sensors are defective
Behavior The Fronius IG Plus will disconnect from the grid for
safety reasons
Remedy If the status message remains on the display: notify a
Fronius-trained service technician
407
Temperature sensor at heat sink is defective
Behavior The Fronius IG Plus will disconnect from the grid for
safety reasons
Remedy If the status message remains on the display: notify a
Fronius-trained service technician
408
Direct current feed
Behavior The Fronius IG Plus will disconnect from the grid for
safety reasons
Remedy If the status message remains on the display: notify a
Fronius-trained service technician
Messages -
Class 4