Fronius IG Plus 35 - Display Values in Day; Year; Total Display Mode; General; Selecting Day; Year; Total Display Mode

84
1. Selecting ‘Day / Year / Total’
Display Mode
The first display values in the
‘Day / Year / Total’ display mode
2. Use the ‘Down’ (2) key to scroll
to the next display value
Scroll back using the ‘Up’ key
(1)
(1) (2)
First display values in the ‘Day’ display
mode
(1) (2)
First display values in the ‘Year’ display
mode
The time when the Fronius IG Plus is turned on signals the start of the
day. If the DC-in lead is disconnected, the following values will be reset for
the ‘Day’ display mode after the unit has been restarted:
- Earnings (currency can be selected)
-CO
2
reduction (kg)
- Max. power fed in (watts)
- Max. mains voltage (volts)
- Min. mains voltage (volts)
- Energy taken out of the grid (kWh)
- Fronius IG Plus operating hours
If the Datalogger option is available, the display values are valid for the
entire calendar day.
Display Values in ‘Day / Year / Total’ Display Mode
General
Selecting ‘Day
/ Year / Total’
Display Mode
(1) (2)
First display values in the ‘Total’ display
mode