Fronius IG Plus 35 - Setting the YIELD Menu Option

97
Setting the
‘CO
2
’ Menu
Option
(continued)
The first digit after the decimal
point flashes
7. Use the ‘Up’ and ‘Down’ keys to
select a number for the first
digit after the decimal point
8. Press the ‘Enter’ key
The second digit after the deci-
mal point flashes
9. Use the ‘Up’ and ‘Down’ keys to
select a number for the second
digit after the decimal point
10. Press the ‘Enter’ key
The factor set for the CO
2
re-
duction flashes
11. Press the ‘Enter’ key
The factor set for the CO
2
re-
duction is applied
12. Press the ‘Esc’ key to exit the
‘CO
2
’ menu option
Setting the
‘YIELD’ Menu
Option
1. Select the ‘YIELD’ menu option
2. Press the ‘Enter’ key
The second digit will now flash
5. Use the ‘Up’ and ‘Down’ keys to
select a number for the second
digit
6. Press the ‘Enter’ key