Fronius IG Plus 35 - Displaying the Stateps Menu Option

106
The display switches between
...
‘STATELAST’
and
the last saved status message.
4. Press the ‘Esc’ key
Displaying the
‘STATEPS’
menu option
1. Select the ‘STATEPS’ menu
option
2. Press the ‘Enter’ key
The status of the first power
module PS00 will be displayed,
e.g.: STDBYPSOO
STDBY = standby (no grid feed)
3. Press the ‘Enter’ key to display
the last status message saved
The status of the first power
module PS00 will be displayed
again
5. Use the ‘Down’ key to select the
second or third power module
PS01 or PS02
The status of the selected
power module will be displayed,
e.g.: RUNPSO1
RUN = active grid feed
6. Press the ‘Enter’ key to display
the last status message saved