Fronius IG Plus 35 - Troubleshooting and Maintenance

103
‘SIGCDNI’ (‘Signal Card’ not
installed) or
‘PDCD
NI’ (‘Personal Display
Card’ not installed) or
‘IFCD
NI’ (‘Interface Card’ not
installed)
will be displayed
4. Press the ‘Esc’ key to exit the
‘DATCOM’ menu option
Setting the
‘DATCOM’ Menu
Option
(continued)
Setting the
‘TIME’ Menu
Option
1. Select the ‘TIME’ menu option
2. Press the ‘Enter’ key
The date will appear
(DD.MM.YYYY), the first digit
for the day flashes
3. Use the ‘Up’ and ‘Down’ keys to
select a value for the first day
digit
4. Press the ‘Enter’ key
The second day digit then
flashes
5. Use the ‘Up’ and ‘Down’ keys to
select a value for the second
day digit
6. Press the ‘Enter’ key
The first digit for the month
flashes
7. Use the ‘Up’ and ‘Down’ keys to
select a value for the first
month digit
8. Press the ‘Enter’ key