Fronius IG Plus 35 - Page 110

102
5. Press the ‘Esc’ key to exit the
‘Signal Card Test’
‘SIGCDTEST’ will be displayed
6. Use the ‘Down’ key to select
additional options:
Setting the
‘DAT
COM’ Menu
Option
(continued)
... or Reset Interface Card
(‘IFCDRST’)
7. Press the ‘Enter’ key
‘PDCDDONE’ ...
... or ...
‘IFCDDONE’ will be displayed
8. Press the ‘Esc’ key 2x to exit
the ‘DATCOM’ menu option
If there is a faulty data connec-
tion or options are not installed
‘ERROR’ will be displayed.
3. Select the respective option
using the ‘Down’ key
e.g. Rest Personal Display
Card (‘PDCDRST’) ...
Data connection faulty or DatCom is not installed