Fronius IG Plus 35 - Page 107

99
Setting the
‘YIELD’ Menu
Option
(continued)
The character for the unit prefix
flashes
13. Use the ‘Up’ or ‘Down’ keys to
select a unit prefix:
k = 1000
M = 1000000
14. Press the ‘Enter’ key
The set OFFSET value and the
unit prefix flashes
15. Press the ‘Enter’ key
The set OFFSET value is applied
‘CALI.’ is displayed
17. Press the ‘Enter’ key
The correction value is display-
ed in %, the character for the
sign flashes
18. Use the ‘Up’ and ‘Down’ keys to
select a sign for the correction
value
19. Press the ‘Enter’ key
The digit before the decimal
place flashes
20. Use the ‘Up’ and ‘Down’ keys to
select a value for the digit
before the decimal place
21. Press the ‘Enter’ key
‘OFFset’ is displayed
16. Press ‘Up’ or ‘Down’