Fronius MHP 280i G CMT - JobMaster Function; Torch Trigger Deactivation and Activation; Deactivating Individual or Both Triggers; Activating Torch Triggers

JobMaster func-
tion
The JobMaster welding torch has the
following functions:
-
The desired welding parameter on
the power source can be selected
using the arrow buttons
-
The parameter can be changed
using the +/- buttons
-
The display shows the current pa-
rameter and value
Deactivating the
left or right
torch trigger
The torch triggers on both sides are enabled as standard. If one side needs to be
deactivated, proceed as follows:
Deactivating the left torch trigger
1
Simultaneously press the "-" button on the left side and the "+" button on the
right side. Hold for five seconds
Deactivating the right torch trigger
1
Simultaneously press the "-" button on the right side and the "+" button on
the left side. Hold for five seconds
Deactivating the left and right torch triggers
1
Simultaneously press the "-" button on the right side and the "-" button on
the left side. Hold for five seconds
Activating the left and right torch triggers
1
Simultaneously press the "+" button on the right side and the "+" button on
the left side. Hold for five seconds
42