Fronius MHP 280i G CMT - Connecting Welding Torch to Wirefeeder; Connecting Torch to Power Source and Cooling Unit; Coolant Hose Connection

Connecting the
welding torch to
the wirefeeder
3
4
8
5
7
6
9
10
1
* Only if the optional coolant
connections are fitted in the
wirefeeder and when using a
water-cooled welding torch.
Always connect the coolant ho-
ses according to their colour
coding.
Connecting the
welding torch to
the power source
and the cooling
unit
3
3
1 2
* Only if the optional coolant connections are fitted in the cooling unit and
when using a water-cooled welding torch.
Always connect the coolant hoses according to their colour coding.
3
56