Do not dispose of used devices with domestic waste. Dispose of them according
to the safety rules.
Keep hands, hair, clothing and tools away from moving parts. For example:
-
Cogs
-
Feed rollers
-
Wirespools and wire electrodes
Do not reach into the rotating feed rollers of the wire drive or into rotating drive
components.
The cover of the welding torch may only be opened while maintenance or repair
work is being carried out.
During operation
-
Ensure that the cover is closed.
-
Keep the cover closed.
Safety
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by trained and qualified personnel.
▶
Read and understand this document.
▶
Read and understand all the Operating Instructions for the system compon-
ents, especially the safety rules.
WARNING!
Danger from electric current and risk of injury from the emerging wire electro-
de.
This can result in serious injury and damage to property.
▶
Turn the power source mains switch to the "O" position.
▶
Disconnect the power source from the mains.
▶
Ensure that the power source remains disconnected from the mains until all
work has been completed.
44
To Next Page
Loading...
