Safety
Warning notices
on the device
The welding torch is fitted with safety symbols and a rating plate. The rating plate
and safety symbols must not be removed or painted over. The symbols warn
against operating the equipment incorrectly, as this may result in serious injury
and damage.
Rating plate with safety symbols Warning of moving parts
Do not use the functions described here until you have fully read and understood
the following documents:
-
These Operating Instructions
-
The enclosed "Safety rules" document
-
All the Operating Instructions for the system components, especially the
safety rules
Welding is dangerous. The following basic requirements must be met to ensure
the equipment is used properly:
-
Welders must be sufficiently qualified
-
Suitable protective equipment must be used
-
All persons not involved must be kept at a safe distance from the welding
torch and the welding process
43
EN
To Next Page
Loading...
