Fronius MHP 280i G CMT - Technical Data; General Specifications and Certifications; Gas-Cooled Torch MHP 280 i G CMT Specifications

Technical data
General Voltage measurement (V-Peak):
-
for manually-operated welding torches: 113 V
-
for mechanically-driven welding torches: 141 V
Torch trigger technical data:
-
U
max
= 50 V
-
I
max
= 10 mA
The torch trigger may only be operated in accordance with the technical data.
The product conforms to the requirements of IEC 60974-7 / - 10 Class A.
Gas-cooled wel-
ding torch - MHP
280i G CMT
I (ampere) 10 min/40°C
M21+C1 (EN 439)
Standard
40% D.C.* 280
60% D.C.* 220
100% D.C.* 170
I (ampere) 10 min/40°C
M21+C1 (EN 439)
CMT
40% D.C.* 180
Ø
[mm (in.)] 0.8-1.6 (0.031 - 0.063)
[m (ft.)] 3.85 / 5.85 / 7.85 /
(12.6 / 19 / 26)
[A] 1.45 RMS
[V] AC 38
[m/min
(ipm)]
1-60 (0.039 - 0.236)
* D.C. = Duty cycle
72