Fronius MHP 280i G CMT - Water-Cooled Torch MHP 400 i W CMT Specifications; Current, Wire Diameter, and Cooling Power

Water-cooled
welding torch -
MHP 400i W
CMT
I (ampere) 10 min/40°C
M21+C1 (EN 439)
Standard
100% D.C.* 400
I (ampere) 10 min/40°C
M21+C1 (EN 439)
CMT
100% D.C.* 280
Ø
[mm (in.)] 0.8-1.6 (0.031 - 0.063)
[m (ft.)] 3.85 / 5.85 / 7.85 / (12.6 / 19 / 26)
P
min
[W]** 600 / 850 / 1050
Q
min
[l/min (gal./
min)]
1 (0.26)
p
min
[bar (psi)] 3 bar (43.51 psi)
p
max
[bar (psi)] 5.5 bar (77.77 psi)
[A] 1.45 RMS
[V] AC 38
[m/min
(ipm)]
1-60 (0.039 - 0.2362)
* D.C. = Duty cycle
** Lowest cooling power according to IEC 60974-2
73
EN