Fronius Ohmpilot - Choice of Location - General Remarks

10
Do not install the Ohmpilot such that it overhangs with its connection
sockets facing upwards.
Do not install the Ohmpilot such that it overhangs with its connection
sockets facing downwards.
The following criteria should be taken into account when choosing a location for the
Ohmpilot:
Install only on a solid surface.
If the Ohmpilot is installed in an enclosed space, then forced-air ventilation must be pro-
vided to ensure adequate heat dissipation.
IMPORTANT! The maximum cable length from the output of the Ohmpilot to the load
(heating element) must not exceed 5 m.
Max. ambient temperatures:
0 °C / +40 °C
Relative humidity:
0 - 99%
The direction of air ow within the
Ohmpilot is from the bottom to the top
Do not install the Ohmpilot on the ceiling.
Choice of
Location -
General Remarks