Fronius Ohmpilot - Modbus RTU Connection Setup; WLAN Access Point Setup

39
EN
Establishing a
Connection via
LAN
As standard, the Ohmpilot obtains its IP address automatically from the DHCP server,
meaning that no settings are generally necessary.
The inverter automatically searches for the Ohmpilot, with the search process taking up
to 5 minutes. If the red LED is unlit and the green LED is ashing, the Ohmpilot is work-
ing correctly.
A static IP address can be assigned to the Ohmpilot via the web interface.
1. Open the website http://ohmpilotL.local. Alternatively, the IP address assigned by the
DHCP server can also be read off. Almost every router displays the devices connected to
it (its clients) on its web interface. Apps such as Fing can also help to nd the IP address
that has been assigned automatically. Alternatively, the Fronius Solar.web app can also
be used to search for the Ohmpilot in the network.
NOTE! In networks with a DNS sufx, the Ohmpilot can be reached at http://
ohmpilotL.<DNS sufx>. E.g. http://ohmpilotL.fronius.com
In order to congure the IP address manually, the "static" option must be selected. Then
enter the IP address required.
The Ohmpilot can then be reached at http://ohmpilotL.local or at the xed IP address
assigned.
In order to implement various settings, the WLAN connection must briey be
opened as follows
1. Press the button on the Ohmpilot 2x. The blue LED ashes (twice) for as long as the
WLAN access point is active (30 minutes). Before the access point is opened, a search
for available WLAN networks is carried out.
2. Activate the "Ohmpilot" WLAN network on your smart device or PC.
3. Enter the website http://192.168.250.181 or http://ohmpilotW.local in the browser.
Alternatively, the Fronius Solar.web app can also be used to search for the Ohmpilot in
the network.
NOTE! In networks with a DNS sufx, the Ohmpilot can be reached at http://
ohmpilotW.<DNS- Sufx>. E.g. http://ohmpilotW.fronius.com
4. Implement the settings.