Fronius Ohmpilot - Intended Use; System Components Required; Integrating the Fronius Smart Meter; Device Description and System Design

9
EN
Explanation of
Symbols -
Installation
Position
The Ohmpilot is designed to be installed vertically on a vertical wall.
Do not install the Ohmpilot horizontally.
Do not install the Ohmpilot on a sloping surface.
Do not install the Ohmpilot on a sloping surface with its connection
sockets facing upwards.
Do not install the Ohmpilot at an angle on a vertical wall.
Do not install the Ohmpilot horizontally on a vertical wall.
Do not install the Ohmpilot such its connection sockets are facing
upwards.