Fronius Ohmpilot - Establishing the Data Connection; Possible Communication Channels

37
EN
The data connection is primarily required so that the inverter or Datamanager can share
default values with the Ohmpilot. For some applications, however, it is also necessary to
implement settings via the Ohmpilot website.
There are 3 possible communication channels:
- Modbus RTU (via RS 485)
- LAN (Ethernet)
- WLAN
Establishing the Data Connection
Possible
Communication
Channels
NOTE! The Datamanager 2.0 must have software version 3.8.1-x or a later ver-
sion installed.