Fronius Primo 5.0-1 AUS - Controls and Display Overview; Physical Controls and Display; Status LED Functions; Function Key Operations

Controls and indicators
Controls and dis-
plays
Item Description
(1) Display
For displaying values, settings and menus
Monitoring and status LEDs
(2) General status LED (red) lights up
-
if a status message is being displayed on the monitor
-
If the process of feeding energy into the grid is interrupted
-
During error handling (the inverter waits for an acknowledge-
ment or for an error to be rectified)
(3) Startup LED (orange) lights up
-
If the inverter is in its automatic startup or self-test phase (as
soon after sunrise as the solar modules are delivering sufficient
power)
-
If the inverter has been switched to Standby mode in the Setup
menu (= feeding energy into the grid switched off manually)
-
If the inverter software is being updated
(4) Operating status LED (green) lights up
-
If the PV system is working correctly after the inverter's auto-
matic startup phase
-
all the time while energy is being fed into the grid
Function keys - allocated different functions depending on the selection:
(5) "Left/up" key
For navigating to the left and up
(6) "Down/right" key
For navigating down and to the right
(7) "Menu/Esc" key
For switching to the menu level
For quitting the Setup menu
(8) "Enter" key
For confirming a selection
20