The keys are capacitive and any exposure to water can impair their function. Wipe
the keys dry with a cloth if necessary to ensure optimum functionality.
Display Power for the display comes from the mains voltage. Depending on the setting
selected in the Setup menu, the display can be kept on all day.
IMPORTANT! The display on the inverter is not a calibrated measuring device.
A slight inaccuracy in comparison with the energy meter used by the energy
company is intrinsic to the system. A calibrated meter will be needed to calculate
the bills for the power supply company.
Display areas in Display mode
Display areas in Setup mode
(*) Scroll bar
(**) The Energy Manager symbol
is displayed when the Energy Manager function is activated
(***) Inv. no. = Inverter DATCOM number,
Save symbol - appears briefly while set values are being saved,
USB connection - appears if a USB stick has been connected
21
EN
To Next Page
Loading...
