EasyManua.ls Logo

Fronius Primo 5.0-1 AUS - Technical Specifications; Input and Output Electrical Data; General Device Specifications

Fronius Primo 5.0-1 AUS
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data
Fronius Primo 3.0-1 3.5-1 3.6-1
Input data
MPP voltage range 200 - 800 V
Max. input voltage
at 1000 W/m²/14 °C in an open circuit
1000 V
Max. input current (MPPT 1 / MPPT 2) 12.0 A
Max. short circuit current of the solar modules 18.0 A
Max. inverter backfeed current to the array
3)
18.0 A
Output data
Rated power (P
nom
) 3000 W 3500 W 3680 W
Max. output power 3000 W 3500 W 3680 W
Rated apparent power 3000 VA 3500 VA 3680 VA
Nominal grid voltage 1 ~ NPE 220 / 230 / 240 V
Min. grid voltage
Inverter topology 150 V
1)
Max. grid voltage
270 V
1)
Max. output current 13.7 A 16.0 A 16.8 A
Nominal frequency
50 / 60 Hz
1)
Total harmonic distortion < 5%
Power factor (cos phi)
0.85 - 1 ind./cap.
2)
Max. permitted mains impedance Z
max
at PCC
None
Current (inrush)
5)
Max. output fault current / duration 38 A / 172 ms
General data
Maximum efficiency 98.0% 98.0% 98.0%
European efficiency 96.1% 96.8% 96.8%
Self-consumption at night 0.6 W
Cooling Controlled forced-air ventilation
Protection class IP 65
Dimensions h x w x d 628 x 428 x 205 mm
Weight 21.6 kg
Permitted ambient temperature -40 °C – +55 °C
48

Table of Contents

Other manuals for Fronius Primo 5.0-1 AUS

Related product manuals