Fronius Robacta Reamer V Twin - Cleaning Program Sequence - Overview

Cleaning pro-
gram sequence -
overview
NOTE!
Run through a complete cleaning process each time you start to weld.
The cleaning program sequence is composed of the following sub-processes:
1.
Wire cutter - pos. A
2.
"Parting agent level" query (option)
3.
"Cleaning motor lowered" query
4.
"Gas nozzle free" query
5.
Cleaning - pos. B
A
B
50 mm
1.97 in.
50 mm
1.97 in.
Pos. A = wire cutter, pos. B = cleaning
55
EN