Installing the compressed air supply
Establishing the
compressed air
supply for the
cleaning device,
function of the
compressed air
relief valve
To establish the compressed air supply:
1
Depressurise the compressed air supply line of the cleaning device and en-
sure that it remains depressurised for the duration of the following work on
the device
2
Screw the supplied compressed air relief valve into the compressed air con-
nection on the cleaning device
3
Connect the compressed air supply line to the compressed air relief valve
The compressed air supply to the cleaning device can be broken and re-estab-
lished by moving the compressed air relief valve forwards and backwards - see
description below.
The diagram below shows the compressed air relief valve in the closed position =
no compressed air supply to the device:
Compressed air relief valve closed
The diagram below shows the compressed air relief valve in the open position =
compressed air is being supplied to the device:
Compressed air relief valve open
43
EN
To Next Page
Loading...
