Fronius Robacta Reamer V Twin - Adjust the Swivel Mechanism Stop Angle; General; Preparatory Work

Adjust the swivel mechanism stop angle
General To make it easier to adjust the stop angle, it is advisable to fit one of the following
adjustment aids to the torch neck:
-
Robacta Twin 500 adjustment aid, item no. 42,0001,5559
-
Robacta Twin 900 adjustment aid, item no. 42,0001,5560
Preparatory
work
1
Move the welding torch to the cleaning position
1
2
1
2
(1) (1)
(1)
(1)
3
Undo the four Allen screws (1)
4
Remove cleaning device housing
cover
73
EN