What to do if nothing happens when pressing the torch trigger on my Fronius TRANS STEEL 3500 C0MPACT?
If nothing happens when you press the torch trigger on your Fronius Welding System, plug in the control plug if you are using a welding torch with an external control plug. If the issue persists, the welding torch or welding torch control line might be faulty, consider replacing the welding torch.
General| Input Voltage | 3 x 400 V |
|---|---|
| Output Current | 350 A |
| Protection Class | IP23 |
| Welding Process | MIG/MAG |
| Power Supply | 3-phase |
Defines symbols used to indicate hazards and precautions.
Details welding risks and necessary personal protective measures.
Highlights electrical hazards and precautions for safe operation.
Guides through setting parameters for synergic MIG/MAG welding processes.
Details parameter adjustment for manual MIG/MAG welding processes.
Addresses common issues like no function, no welding current, and no shielding gas.
To Next Page