TR 3000 remote control - view from the left
(4) Welding process selector
switch
For selecting the welding pro-
cess
-
MMA welding
-
MMA welding with Cel elec-
trode
-
Special processes
-
TIG welding with touch-
down ignition
(5) Welding current range selector switch
For selecting the welding current range that can be set using the welding
current adjuster (3)
-
min - 150 A:
0 minimum welding current
10 welding current is 150 A
-
100 A - max:
0 welding current is 100 A
10 maximum welding current
TR 3000 remote control - view from the right
(6) Arc-force dynamic adjuster
Manual metal arc welding ... for
influencing the short-circuiting
amperage at the instant of dro-
plet transfer
0 soft, low-spatter arc
100 harder, more stable arc
(7) Changeover switch for polarity reverser
For controlling the polarity reverser (option)
(+) Positive welding potential on the (+) current socket
(-) Negative welding potential on the (-) current socket
IMPORTANT! Parameters which can be adjusted on the remote control cannot
be altered on the power source. These parameters can only be altered on the re-
mote control.
78
To Next Page
Loading...
