Fronius TransPocket 5000 CEL - Fitting the Handle to the Power Source

(4)(4)
(3) (3) (3)
Straighten the locking devices and secure them
7
Straighten the locking devices by
moving the outer threaded bolts
(4) as far as they will go
8
Tighten the six wing nuts (3)
9
Carefully place the trolley with
power source on its wheels
Fitting the hand-
le to the power
source
(1)
(2)(1)
(2)
(2)
(2)
Allow the handle plates to engage
(3)
(1) (1)
Handle plates and handle tube
IMPORTANT! When fitting the two handle plates (1) together, make sure that
the locking devices (2) on the underside of the handle plates (1) are fully enga-
ged.
87
EN