9
EN-US
Safety symbols on the rating plate:
Welding is dangerous. The following basic requirements must be met:
- Adequate welding qualifications
- Appropriate protective equipment
- Exclusion of unauthorized people
Do not use the functions described here until you have fully read and understood the fol-
lowing documents:
- These Operating Instructions
- All system component Operating Instructions, especially the safety rules
National Fronius
Technical Sup-
port team (TSN)
If you have any questions about the failure analysis, your national Fronius Technical Sup-
port team is at your disposal (TSN).
mailto: welding.techsupport@fronius.com
General Each chapter of the Service Instructions covers a different topic. Use each chapter as an
independent source of information.
To Next Page
Loading...
Need help?
General
