Fronius TransTig 210 Service Manual

18
Opening the Housing
Opening the
housing
DANGER!
Risk of death due to contact with live components when the device is open!
An electric shock will cause serious injury or death.
► If the device is switched on with the housing open, do not touch the components inside
the housing.
► Use only suitable measuring probes or test probes.
Remove 2 5x18 TX25 screws (1) on
the control panel.
Fold the control panel (2) to the side.
Remove 4 5x18 TX25 screws (3) on
the front of the device and remove the
housing feet.
(1)(1) (2)
1
2
(3)
(3)
3

Fronius TransTig 210 Specifications

General

Brand	Fronius
Model	TransTig 210
Category	Welding System
Language	English