Fronius TransTig 5000 User Manual

47
EN
Minimum equipment needed for welding task
General Depending on which welding process you intend to use, a certain minimum equipment lev-
el will be needed in order to work with the power source.
The welding processes and the minimum equipment levels required for the welding task
are then described.
TIG AC welding - MagicWave power source
- Grounding (earthing) cable
- TIG welding torch with rocker switch
- Gas connection (shielding gas supply), with pressure regulator
- Filler metals (as required by the application)
TIG DC welding - Power source
- Grounding (earthing) cable
- TIG welding torch with rocker switch
- Gas connection (shielding gas supply)
- Filler metals (as required by the application)
MMA welding - Power source
- Grounding (earthing) cable
- Electrode holder
- Rod electrodes (as required by the application)

Fronius TransTig 5000 Specifications

General

Brand	Fronius
Model	TransTig 5000
Category	Welding System
Language	English