1-phase charging
The Wattpilot is carrying out 1-phase (230 V) charging with
low to high charging current.
- One series of blue LEDs moves in a clockwise direction.
- The level of charging current is indicated by the number
of LEDs and the speed of rotation.
3-phase charging
The Wattpilot is carrying out 3-phase (400 V) charging with
low to high charging current.
- Three series of blue LEDs move in a clockwise direction.
Charging finished
The charging process is complete.
- All LEDs light up green.
ID chip detected
The Wattpilot has detected an authorised ID chip.
- Five LEDs light up green.
Invalid value
Wattpilot displays an invalid input. Pressing the pushbutton
was not permitted or an ID chip was detected but not author-
ised.
- Five LEDs light up red.
17
EN
To Next Page
Loading...
Need help?
General
