PREPARING THE TRACTOR
MAKING DRAWBAR SHIELD
Use 2 or 4 ply belting.
THREE-POINT HITCH POSITION
IMPORTANT: To prevent damage to rake hitch
when making turns, make sure
draft links clear rake tongue.
Position tractor draft links to avoid interference with
rake tongue when making turns.
CHECKING BALLAST, WHEEL SPACING,
AND TIRE INFLATION
Provide sufficient weight to stabilize tractor when
operating on hilly land or other adverse conditions. (See
your tractor operator’s manual.)
To insure proper stability, adjust ballast, wheel spacing
and tire inflation according to tractor operator’s manual.
15
To Next Page
Loading...
Need help?
General
