CHAPTER 6: OPERATING INSTRUCTIONS
6-3
6.4 Before Relocating Fryer for Service
WARNING
Moving a fryer filled with hot cooking oil may cause splattering. Extreme care must be
exercised. It is recommended that the operator or servicer follow the draining instructions of
this manual before attempting to relocate the fryer for service.
If you need to relocate a fryer installed with legs, remove all the weight from each leg before moving.
If a leg becomes damaged during movement, contact your service agent for immediate
repair/replacement.
1. Turn off fryer controller. Disconnect the electrical power from the source.
2. Relocate the fryer for service accessibility.
3. After servicing is complete, return the fryer to the operating position. Reconnect all electrical
power into source. Secure fryers into position. Refill fryer and resume use.
6.5 Shutting Fryer(S) Off
1. Press fryer controller ON/OFF switch(es) to OFF position.
2. Put frypot cover(s) in place over frypot(s).
To Next Page
Loading...
