1.4.4 M2007 Menu Summary Tree
Reflected below are the major programming sections in the M2007 and the order in which submenu headings will be
found under the sections in the Installation and Operation Manual.
Adding New Product Menu Items See pg. 4-12
Storing Product Menu Items in Product Buttons See pg. 4-15
Draining, Refilling, and Disposing of Oil and Boil-out See pg. 4-16
Filter Menu See pg. 4-20
1. Auto Filter See pg. 5-2
2. Maint Filter See pg. 5-8
3. Dispose See pg. 4-16 thru 4-20
4. Drain to Pan See pg. 4-21
5. Fill Pot from Drain Pan See pg. 4-22
6. Fill Pot from Bulk See pg. 4-22
Programming
Level 1 Program See pg. 4-24
1. Product Selection See pg. 4-24
a. Name
b. Cook Time
c. Temp
d. Cook ID
e. Qual Tmr
f. Duty Time 1
g. Duty Time 2
h. AIF Disable
i. Assign Btn
2. AIF Clock See pg. 4-25
a. Disabled
b. Enabled
3. Deep Clean Mode (Boil Out) See pg. 4-27
4. High-Limit Test See pg. 4-30
a. Hi-Limit Test 1
b. Hi-Limit Test 2
5. Fryer Setup See pg. 4-9
Level 2 Program (Manager Level) See pg. 4-31
1. Prod Comp Sensitivity for product See pg. 4-32
2. E-Log Log of last 10 error codes See pg. 4-33
3. Passwords
Change passwords See pg. 4-33
a. Setup
b. Usage
c. Level 1
d. Level 2
e. Get Mgr
4. Alert Tone Volume and Tone See pg. 4-34
a. Volume 1-9
b. Tone 1-3
5. Filter After Sets number of cooks before filter prompt See pg. 4-35
6. Filter Time Sets amount of time between filter cycles See pg. 4-36
Info Mode Menu See pg. 4-37
Full/Split Vat Configuration
1. Filter Stats See pg. 4-37
2. Review Usage See pg. 4-38
3. Last Load See pg. 4-40