1.8.3 RTI LOV TEST QUICK REFERENCE
DISPOSE TO WASTE, REFILL POT FROM BULK:
1. Hold down “filter” button until computer beeps twice.
2. Scroll down to “dispose” using “Info" button then press “√” button to select.
3. Select “Yes” by pressing “√” to dispose of oil in pot (this is a timed function).
4. “Vat Empty” is displayed
5. Select “Yes” (by pressing “√”) if it is empty or “No” (by pressing “X”) if vat still has oil.
6. “Clean Vat Complete” is displayed
7. Press “√” if vat is clean (oil disposes automatically for 60 seconds, if this is selected) and “X”
if it is not clean and needs to be.
8. “Engage Dispose” is displayed. Switch the RTI switch to dispose.
9. Press the “√” to start disposal. “Pan to Waste” displayed.
10. “Pan Empty” is displayed
11. Press “√” if oil in filter pan is empty. Select “X” if pan still has oil in it.
12. “Disengage Dispose” is displayed. Switch off the RTI dispose switch.
13. Press “√” when RTI dispose switch is off.
14. “Fill Pot From Bulk” is displayed.
15. Press “√” if you wish to fill pot.
16. Hold down “√” to fill pot to desired level.
17. Press “X” to Exit program.
DISPOSE TO WASTE:
1. Hold down “filter” button until computer beeps twice.
2. Scroll down to “dispose” using “Info” button and press “√” button to select
3. Select “Yes” by pressing “√” to dispose of oil in pot (this is a timed function).
4. “Vat Empty” is displayed
5. Select “Yes” (by pressing “√”) if it is empty or “No” (by pressing “X”) if vat still has oil.
6. “Clean Vat” is displayed
7. Press “√” if vat is clean (oil disposes automatically for 60 seconds, if this is selected) and “X”
if it is not clean and needs to be.
8. “Engage Dispose” is displayed. Switch the RTI switch to dispose.
9. Press the “√” to start disposal. “Pan to Waste” displayed.
10. “Pan Empty” is displayed
11. Press “√” if oil in filter pan is empty. Select “X” if pan still has oil in it.
12. “Disengage Dispose” is displayed. Switch off the RTI dispose switch.
13. “Fill Pot From Bulk” is displayed.
14. Press “X” if you wish to leave pot empty and exit program.
FILL POT FROM BULK:
1. Hold down “filter” button until computer beeps twice.
2. Scroll down to “Fill Pot From Bulk”
3. Press “√” if you wish to fill pot.
4. Hold down “√” to fill pot to desired level.
5. Press “X” to Exit program.
FILL JUG FROM BULK:
1. When “Orange” indicator light is on, the pot top-off jug is empty.
2. To refill jug press ADD button on the RTI box located on back side of door that accesses jug.
3. Hold down button until oil is to desired level in jug.
To Next Page
Loading...
