1.7 Fryer Setup Mode
Setup mode allows technicians to set the time, date, temperature format, language, fryer type,
vat type and oil system.
1. With the computer displaying OFF, press and hold the TEMP and INFO buttons until
LEVEL 1 is displayed.
2. Press the TEMP key once to FRYER SETUP.
3. The computer displays FRYER SETUP and then changes to ENTER CODE.
4. Enter 1234.
5. Press the 9 (1) button to accept selection.
6. The computer displays TIME FORMAT on the left and 12 HR on the right.
7. Press the 4button to toggle between 12 HR and 24 HR time formats.
8. Press the 9 (1) button to accept selection.
9. The computer displays ENTER TIME on the left and HH:MM on the right.
10. Enter the time in hours and minutes using the 0-9 keys.
11. Press the 9 (1) button to accept selection.
12. The computer displays ENTER TIME on the left and am on the right.
13. Press the 4button to toggle between AM and PM if 12 HR time format was chosen.
14. Press the 9 (1) button to accept selection.
15. The computer displays DATE FORMAT on the left and US on the right.
16. Press the
4button to toggle between US and INTERNTL time formats.
17. Press the 9 (1) button to accept selection.
18. The computer displays enter date on the left and MM-DD-YY or DD-MM-YY
on the right.
19. Enter the date using the 0-9 keys.
20. Press the 9 (1) button to accept selection.
21. The computer displays language on the left and English on the right.
To Next Page
Loading...
