9-5
Name of option Function and application
Mounting adapters
FRENIC-Mini series of inverters can be installed to the control board of
your system using mounting adapters which utilize the mounting holes
used for conventional inverters (FVR-E11S series of 0.75 kW or below
or 3.7 kW). The FVR-E11S-2/4 (1.5 kW/2.2 kW) and FVR-E11S-7 (0.75
kW/1.5 kW) series may be replaced with any of the FRENIC-Mini series
of inverters without the use of adapters.
Rail mounting bases
A rail mounting base allows any of the FRENIC-Mini series of inverters
to be mounted on a DIN rail (35 mm wide).
Other options
NEMA1 kit
Installing the NEMA1 kit to the inverter lets the inverter have the
NEMA1-compliant (UL TYPE1 certified) protective enclosure.
To Next Page
Loading...
