3-18
* Pressing the
key with the
e
52
data displayed returns to
f
01
.
Figure 3.7 "Data Checking" Status Transition (Changes made only to F01, F05, E52)
Basic key operation
The basic key operation is the same as for "Data setting."
To check function codes in Menu #2 "Data checking," it is necessary to set function code
E52 to "1" (Function code data check mode) or "2" (Full-menu mode).
For details, refer to "Limiting menus to be displayed" on page 3-13.
To Next Page
Loading...
