5-3
The following tables list the function codes available for the FRENIC-Mini series of inverters.
If you find any [-] (not available here) mark in the related page column of the function code
tables, refer to FRENIC-Mini User’s manual (MEH446) for details.
F codes: Fundamental Functions
*1 Values in parentheses ( ) in the above table denote default settings for the EU version except three-phase
200 V class series of inverters.
*2 "Fuji's standard torque boost," "Nominal rated current of Fuji standard motor," and "Nominal rated capacity of
Fuji standard motor" differ depending upon the rated input voltage and rated capacity. Refer to Table 5.1 "Fuji
Standard Motor Parameters" on page 5-12.
*3 AVR: Automatic Voltage Regulator
(Note 1) For the three-phase 200 V, single-phase 200 V, and single-phase 100 V class series
(Note 2) For the three-phase 400 V class series
To Next Page
Loading...
