5-6
*1 Values in parentheses ( ) in the above table denote default settings for the EU version except the three-phase
200 V class series of inverters.
*2 "Fuji's standard torque boost," "Nominal rated current of Fuji standard motor," and "Nominal rated capacity of
Fuji standard motor" differ depending upon the rated input voltage and rated capacity. Refer to Table 5.1 "Fuji
Standard Motor Parameters" on page 5-12.
(Note) Function codes E45 to E47 appear on the LED monitor; however, the FRENIC-Mini series of inverters does not
recognize these codes.
To Next Page
Loading...
