Fuji Electric Frenic User Manual

Instruction Manual
Inverter Support Software
FRENIC Loader VG
(WPS-VG1-PCL)
Thank you for purchasing our high-performance, vector control FRENIC-VG series of inverters.
• This manual provides all the information on Fuji’s inverter support software FRENIC Loader VG.
Read this manual carefully for correct use of FRENIC Loader VG
• This manual does not contain information on the inverter itself. Read the inverter user's manual, inverter
instruction manual in conjunction with this manual.
• Incorrect handling may prevent Loader from operating correctly, shorten the inverter service life, or cause
problems.
Fuji Electric Co., Ltd. INR-SI47-1589d-E

Fuji Electric Frenic Specifications

General

Series	Frenic
Overload Capacity	150% for 60 seconds
Communication Options	RS485
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Enclosure	IP20
Cooling Method	Fan Cooled
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to 65°C
Ambient Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000m
Output Voltage	3-phase 230V, 3-phase 480V, 3-phase 600V, 3-phase 690V