2.3.1.4. Edit List
This function allows you to list the function code setting values and setting ranges and edit them.
You can display the function codes by various classifications. [Edit] menu on Menu Bar is
displayed only when the Edit List window opens.
･Function
･Change from
Factory-set Values
･Contents of
change (Blue)
･R/W failure (Pink)
･User Definition
･Communication
Code
･Comparison Result
･Search Result
: Display the function codes by group.
: Displays the function codes of the setting
values different from the factory-set values
(excluding communication codes).
: Displays the edited function codes before
written to the inverter.
: Displays the function codes which have
failed to write to the inverter.
: The user can freely define the display items.
: Displays communication function codes only.
: Displays comparison results with the inverter
or saved files only.
: Displays the execution result of [Edit] ->
[Search].
Change of Setting
Values:
You can select the
function code data
from Drop down
Menu or Edit
Window.
[Read]
[Write]
[Factory-set]
[Func. Code set]
[Function code info]
[Initialize]
[Advanced]
[Print]
[Comparison]
: Reads the function codes of the inverter
selected in [Target Inverter] to the loader.
: Write the function codes of the loader to the
inverter selected in [Target Inverter].
: Resets the selected function code to the
factory-set value.
: Displays a dialog to edit the selected function
code setting values.
: Displays the selected function code
information.
: Initializes the function code setting values
within the inverter.
: Displays a dialog to change the display items,
function code attributes and printing setting.
: Prints the function code list selected in the tree
in the left pane.
: Displays the comparison results with the saved
data or the inverter data.
[Target Inverter]:
Selects the target
inverter to/from
which data is
read/written.
[Close]:
Closes the
Function Code
Setting window.
48
To Next Page
Loading...
