2.3.1.6. File Information
This function displays the information which may affect the function codes. You can change
“Type”, “Voltage”, “Capacity” and “Definition File” as you want.
・ When reading the information codes from the inverter, the information on that inverter is
displayed.
・When creating a new code, the default information by machine type is displayed.
・If the
VG loader WPS-VG1-PCL version is after "2.3.0.0", the ROM version of an inverter and the
loading information on an option card will also be displayed (not expressed as the function
code data of VG7 series).
When clicking on the file information [Change] button, the Settings dialog is displayed.
60
To Next Page
Loading...
