Fuji Electric MICREX-SX series SPF - Page 14

1-6
Section 1 Overview
Product name Type Specication
AIO expansion unit
(without power supply)
NA0AX06-MR
Analog input unit,
6 channels: 14-bit analog input (-10 to 10V, 0 to 10V, -20 to 20mA, 0 to 20mA)
NA0AY02-MR
Analog output unit,
2 channels: 14-bit analog output (-10 to 10V, 0 to 10V, -20 to 20mA, 0 to 20mA)
NA0AW06-MR
Analog input/output unit
4 channels: 14-bit analog input (-10 to 10V, 0 to 10V, -20 to 20mA, 0 to 20mA) +
2 channels: 14-bit analog output (-10 to 10V, 0 to 10V, -20 to 20mA, 0 to 20mA)
Temperature measurement
unit
(without power supply)
NA0AX02-TC Thermocouple input unit: 2 channels, resolution 0.1°C
NA0AX06-TC Thermocouple input unit: 16 channels, resolution 0.1°C
NA0AX16-TC Thermocouple input unit: 6 channels, resolution 0.1°C
NA0AX06-PT Resistance thermometer element input unit: 6 channels, resolution 0.1°C
Load cell unit NA0F-LC1 Load cell unit, 1 channel
AIO board
(Front board type)
NA3AY02-MR
Analog output board,
2 channels: 12-bit analog output (0 to 10V, 0 to 20mA)
NA3AW03-MR
Analog input/output board,
2 channels: 12-bit analog input (0 to 10V, 0 to 20mA) +
1 channel: 12-bit analog output (0 to 10V, 0 to 20mA)
Communication board
(Front board type)
NA3LA-RS1 Communication board, RS232C (Port 1) + RS-485 (Port 2)
NA3LA-ET1 Ethernet communication board, 1 channel
Communication unit
(Expansion left side unit)
NA0LA-RS3 Communication unit, 2 ports RS-232C (Port 3 + Port 4)
NA0LA-RS5 Communication unit, 2 ports RS-485 (Port 3 + Port 4)
NA0LA-ET1 Ethernet communication unit, 1 channel
High-precision load cell unit
(Expansion left side unit)
NA0FA-LC1 High-precision load cell unit, 1 channel
Expansion power supply unit
NA0S-2
Input voltage: 100–240V AC, Output: internal 5V DC; internal 24V DC
Service power supply output: 24V DC; 21W
NA0S-4
Input voltage: 24V DC, Output: internal 5V DC; internal 24V DC
Service power supply output: 24V DC, 14W
Healthy unit
(Terminating connector)
NA8P-HE Unit for detecting a dropout/fault of expansion right side units
Memory pack NA8PMF-20 Memory for storing a project and data
Loader connecting cable NA0H-CUV RS-232C/USB conversion cable for loader connection port (Port 0), 1.8m (Note 1)
Personal computer loader
NP4H-SEDBV3 SX-Programmer Expert (D300win)
NP4H-SWN SX-Programmer Standard
Notes:
1) You need to install the USB driver into the personal computer.
See “Appendix 1 Installing USB Driver.”