MHT258a (Engl.)2-3
(1) Cubic type motor (0.1 to 5 [kW]) (cont’d)
(a) Basic design
(ii) 2 to 5 [kW]
Type GYC□□□DC1-S 202 302 402 502
Rated output [kW]2345
Rated torque (*4) [N•m] 6.37 −−−
Rated 3000Speed [r/min]
Max. 5000
Breakdown (max.) torque (*3) [N•m] 19.1 −−−
Moment of inertia of motor rotor (×10
-3
)J[kg•m
2
] 0.575 −−−
Rated 12.6 −−−Current [A]
Max. (*3) 37.8 −−−
Winding insulation class F −−−
Operation duty type Continuous
Degree of enclosure protection Totally enclosed, IP55 except for shaft sealing
Motor power
Electrical connection
terminals
Encoder detector
With cannon connectors
Temp. detection Without providing
Type of construction (mounting) IMB5, IMV1, IMV3, flange-mounted
Shaft extension Cylindrical extension with key
Final color for external non-machined surface Munsell N1.5
Encoder detector 16-bit serial encoder
Vibration level, peak to peak amplitude 10 micrometers (*1)
Install location For indoors, 1000[m] and below of site-altitude
Ambient climatic conditions Temperature : −10 to +40 [℃], humidity : 90 [%] RH max. (free from condensation)
Acceleration vibration, acceptable (max.) 24.5 [m/s
2
] −−−
Mass (weight) [kg] 8.2 −−−
(b) Additional data for motor with providing brake
(ii) 2 to 5 [kW]
Type GYC□□□DC1-S-B 202 302 402 502
Rated output [kW]2345
Rated torque [N•m] 6.37 −−−
Braking torque [N•m] 17.0 −−−
Rated voltage DC [V] 24
Attraction time [ms] 120 −−−
Release time [ms] 30 −−−
Brake input [W] 12 −−−
Mass (weight) [kg] 11.0 −−−
To Next Page
Loading...