MHT258a (Engl.)9-14
(ii) Resistor heat 2
• Touch panel display
• Detection (example)
The regenerative power processing transistor mounted on the amplifier overheats.
• Cause, check and remedy
The ambient temperature of amplifier should be 55 [°C] max.
If an alarm appeared before running such as immediately after turning on power, contact us.
(iii) Data error, memory error
• Touch panel display
• Detection (example)
Contents of the non-volatile storage memory mounted on the amplifier are destroyed.
• Cause, check and remedy
If an alarm appeared immediately after turning on power, contact us.
(iv) Circuit trouble, amplifier trouble
• Touch panel display
• Detection (example)
The control power supply circuit mounted on the amplifier is abnormal.
• Cause, check and remedy
If an alarm appeared immediately after turning on power, contact us.
(v) Encoder trouble
• Touch panel display
• Detection (example)
The encoder may be broken.
• Cause, check and remedy
If an alarm appeared immediately after turning on power, contact us.
To Next Page
Loading...