Fuji Electric RYS...S3-VVS Series User Manual

RYS-V Type
User's Manual
MHT258a (Engl.)

Fuji Electric RYS...S3-VVS Series Specifications

General

Brand	Fuji Electric
Model	RYS...S3-VVS Series
Category	Engine
Language	English

Summary

Safety Instructions

Cautionary Indications and Symbols

Defines DANGER and CAUTION indications and common pictorial symbols used in the manual.

Warning Display

2. Specifications

2.1 Motor Specifications

Provides detailed specifications for cubic and slim type motors, including brake options.

2.2 Amplifier Specifications

Details the basic specifications of the RYS amplifier series for various output ranges.

2.3 Torque-Speed Data

Presents torque-speed characteristics for GYC and GYS motors with different amplifier combinations.

3. Installation

3.1 Motor Installation

Covers installation environment, mounting types, protection, and encoder considerations for motors.

3.2 Amplifier Installation

4. Terminal Diagrams and Wiring

4.1 Amplifier, Motor, and Optional Devices Layout

Illustrates the layout and connections for amplifiers, motors, and optional devices.

4.2 Commercial Power Supply

4.3 Wiring Between Motor and Encoder

Details motor wiring, encoder wiring, and important precautions for connections.

4.4 Host Interface (I/F)

5. Control Functions

5.1 Summary of Control Functions

5.2 Run Command and Alarm Reset

Explains the RUN command for motor operation and RST signal for alarm reset.

5.3 Speed Control Functions

Details speed control, including forward/reverse commands, multistep speeds, and speed zero.

5.4 Position Control

5.5 Signals for Safety

Explains safety signals like Forced Stop, Overtravel, Torque Limit, and External Fault Input.

5.6 Torque Control

6. Parameter Setting

6.1 Mechanical Equipment System Parameters

6.2 Peripheral Device Parameters

6.3 Amplifier Parameters

6.5 List of Parameters

Provides a comprehensive list of basic parameters for the RYS-V type amplifier.

7. Keypad Panel Operations

7.1 Keypad Panel Summary

7.3 Sequence Mode

7.4 Monitor Mode

7.5 Parameter Edit Mode

Guides users on editing basic and system parameters via the keypad panel.

7.7 Test Running Mode

8. Test (Trial) Running Operation

8.1 Preparation for Test Running

8.2 Touch Panel Operations

8.3 Control Input Signals

9. Inspection and Maintenance

9.1 Inspection Procedures

Covers pre-inspection safety, inspection items for motors and amplifiers.

9.2 Memory Backup and Initialization

9.3 Fault Display and Diagnosis

Explains how faults are displayed, including initial status and alarm indications.