MHT258a (Engl.)8-4
8.2 Touch panel
After making sure of status when power is turned on, carry out a test running from the touch panel.
CAUTION
At the test running, the motor must not be connected to the mechanical equipment system, to be prevent unexpectedly
break the mechanical equipment system.
Before the test running, firmly tightened the mounting-flange so that the motor will not dislocated. Remove the coupling
bolts for mechanical connection.
(1) Motor
Check the motor model type and rated output [kW].
Key input LC display (example) Remark
The sequence is displayed.
MODE
MODEMODE
MODE
ESC
ESCESC
ESC
By the ESC key, select the sub mode.
By ∧ key or ∨ key, select [Sn006]
SHIFT
SHIFTSHIFT
SHIFT
ENT
ENTENT
ENT
Pressing the ENT key for at least 1 [sec] displays the motor model type.
GYC type (“C” of cubic) motor of 0.1 [kW] is displayed on the left example.
To Next Page
Loading...