Fuji Electric RYS...S3-VVS Series - Positioning Module

MHT258a (Engl.)4-22
(6) Positioning module : NC1F-VP1
Typical connection with a positioning module for MICREX-F F70 (Fuji’s PLC) is shown below.
Linear positioning can be applied. The pulse train of NC1F-VP1 is open collector output.
The output form setting at our shop before shipping is forward and reverse pulses.
• If MON output is on, the automatic start signal is not validated.
• MOFF at the same scan as when MON is on is not validated.
A6
A7
B7
+12to24[V]
‑12to24[V]
COM
A10
B10
+5[V]
+5[V]
A9
A8
B8
A11
B11
Positioningend
Ready
COM
A12
B12
Reversepulse
COM
Forwardpulse
COM
B4
B9
Externalmarker
COM
A4
B3
A3
A2
B2
Originlimitswitch
Externalinterrupt
Forcedstop
+OT
‑OT
A1
B1
+12to24[V]
+12to24[V]
Ｍ２４
Ｐ２４
Ｍ２４
Ｐ２４
①
②
③
④
⑤
⑥
+24[V]
powersupply
NC1F‑VP1
(continue to the next page)